About QUATRA 4000e
The CEL-FI GO G41 Smart Signal Repeater is the most powerful carrier-grade solution for overcoming cellular coverage issues in indoor environments. Providing up to 100 dB gain, GO G41 offers class-leading 5G/4G/3G voice and data performance. GO G41 also supports 5G NR operation for seamless network migration and consistent connectivity. In addition to providing cellular coverage up to 3,000 m2 (1,500 m2 in the U.K.) when configured with the included donor and server antennas, the system can be expanded with outdoor or additional server antennas for an increased coverage footprint. Plus, GO G41 is network safe and the easiest solution to install.
Off-Air or SuperCell Mode with Fiber Expansion
Network Safe and Carrier Approved with No Noise Guarantee
Remote Monitoring and Management via WAVE Platform
Up to 100 dB Max Gain for 3G/4G/5G Voice and Data
All Digital Category Cable PoE/RFoE Solution
Scalable Up to 12,000 m2 Coverage per Network Unit
System Components
QUATRA 4000e Network Unit
The Network Unit (NU) is the hub of the system. The scalable design works with one to six Coverage Units.
- Provides donor signal to the CEL-FI QUATRA 4000e system
- Provides power to Coverage Units (up to six)
- Connects via ethernet or LTE Modem to the CEL-FI WAVE Platform for remote monitoring and management
Model Number:
› Q44-E999CNU
QUATRA 4000e Coverage Unit
The Coverage Unit (CU) is the remote unit of the system that rebroadcasts the donor signal. The cost efficient and easy-to-deploy system leverages Power-Over-Ethernet (POE) for up to six CUs.
- Provides coverage in the CEL-FI QUATRA system (up to six per Network Unit)
- Power delivered by Power-Over-Ethernet from the Network Unit
- Self-configuring and self-optimizing
- CEL-FI QUATRA 4000e CU is only compatible with CEL-FI QUATRA 4000e NU
Model Number:
› Q41-EXCU
QUATRA 4000e Fiber Hub
CEL-FI QUATRA 4000e Fiber Hub expands the Network Unit capacity from six to up to twelve Coverage Units. The fiber hub can be installed 2.0 km (1.24m) away from the NU to cover large spaces while maintaining the same signal quality throughout the system.
- Multi-carrier Active DAS Hybrid
- Donor source over fiber
- Ofcom and ComReg Approved
- SFP+ module not included
Model Number:
› Q40-EFNU
CEL-FI WAVE Portal
The CEL-FI WAVE Portal is a cloud-based remote management platform that enables device management and maintenance of CEL-FI QUATRA systems. The CEL-FI WAVE platform is designed to also work on mobile phones which facilitates ease of use on site.
CEL-FI COMPASS
The CEL-FI COMPASS is an RF site utility that enables installers and integrators to install and optimize the CEL-FI QUATRA 4000e. The CEL-FI COMPASS requires the CEL-FI WAVE PRO app and this complete solution enables installation and optimization of systems without the need for local Internet Connectivity.
Flexibility at your fingertips
Bands
| Bands | Downlink MHz | Uplink MHz | Technology/Bandwidth |
|---|---|---|---|
|
1 |
2110–2170 |
1920–1980 |
5G/4G/3G/20MHz
|
|
3 |
1805-1880 |
1710-1785 |
5G/4G/3G/20MHz
|
|
7 |
2620-2690 |
2500-2570 |
5G/4G/3G/20MHz
|
|
8 |
925-960 |
880-915 |
5G/4G/3G/15MHz
|
|
20 |
791-821 |
832-862 |
5G/4G/3G/20MHz
|
|
40* |
2300-2390 |
2300-2390 |
5G/4G/3G/20MHz
|
Network Unit Dimensions
Coverage Unit Dimensions
Power (NU only)
Input Voltage: 85-264 V
Input Current: 2.45 A
Power Consumption: 480 W max.
Input Current: 2.45 A
Power Consumption: 480 W max.
Environmental
Operating temperature: 32 to 104 °F (0 to 40 °C)
Surface temperature: 111°F (44 °C) max. at ambient
Non-condensing Humidity: 0% to 95%
Heat Dissipation: Passive Convection
Surface temperature: 111°F (44 °C) max. at ambient
Non-condensing Humidity: 0% to 95%
Heat Dissipation: Passive Convection
External Ports
CU Interface: 2x RJ45 per CU
# of CU max. per NU: 6
Donor Port RF Connectors: 4x 4.3-10 (f)
# of CU max. per NU: 6
Donor Port RF Connectors: 4x 4.3-10 (f)